| Author |
Message |
AlexB138
Joined: 22 Mar 2013
Posts: 1
|
 Posted: Fri Mar 22, 2013 9:40 pm Post subject: Error: Virtual Restore cannot read backup.sqb |
 |
|
I am unable to load a .sqb file in Virtual Restore. It returns the following error when selecting the file:
Virtual Restore cannot read backup.sqb. Check that the file's location and extension are registered with HyperBac.
HyperBac is setup to use .sqb files in all locations.
The volume is a local volume.
The HyperBac service is set to login with an admin level account for testing purposes. The folder was opened to the Everyone role. Neither of these cause a change in the error.
The database that this is a backup of is approximately 2.2TB. The backup is approximately 391GB.
Log file output:
| Code: |
*******************************************************************
*
* 22 Mar 13 16:26:45.874 OPENED LOG FILE
*
HyperFileId=0x0000000000000006
HyperFile=0x0000000009343870
FileName=U:\Snapshot\FULL_MSSQLSERVER2012E_BoomTown_20130321_220000.sqb
OpenTime=Fri Mar 22 16:26:43 2013
OpenProcessId=1804
OpenProcessName=sqlservr.exe
ProcessAttr1=0
ProcessAttr2=0
FileIndexNumber=0x000A000000000040
FileCreationTime=0x01CE270027CF556A
VolumeNumber=0x2E1DC438
HeaderVersion=2
FileType=8
FormatVersion=0xFFFFFFFF
CreateVersion=0x05090000
CreateOS=0x00010601
FileFlags=0x00000044
RequiredVersion=0x00000000
WriteAccess=No
FillFactor=131072
VirtualEOF=0x00000A0000000000
FileActualStart=0x0000000000000000
FileActualEnd=0x00000061C2841400
LastDataBlock=0x00000061C2840000
FileActualMetaEnd=0x0000000000000000
LastCrcOffset=0x00000A0000000000
SequentialOffset=0x00000A0000000000
LastBlockOffset=0x00000A0000000000
IndexType4Format=1
IndexStart=0x0000000000000000
IndexEnd=0x0000000000000000
OpenHandleCount=1
FileDirty=No
AsyncWrites=Yes
AsyncError=0
UpdateCount=0x0000000000000001
LastIoOffset=0x0000000000000000
FileState=0x00000001
LastSumOffset=0x0000000000000000
AffinityMask=0xFFFFFFFFFFFFFFFF
*
*******************************************************************
22 Mar 13 16:26:45.874 1012 GetVirtualBlockForSQB: We have searched the maximum iterations and haven't found the refid: 0
22 Mar 13 16:26:45.874 1012 HyperReadBlock: Failed to load comp data for SQB, File offset: 0xCE9690000. Error: 0xE2000001.
22 Mar 13 16:26:45.874 1012 HyperVirtualRead: Failed to read block at offset: 0xCE9690000, Length: 512. Error: 0xE2000001 |
Please advise. |
|
| Back to top |
|
 |
RajK
Joined: 02 Feb 2012
Posts: 50
|
| Posted: Mon Mar 25, 2013 8:30 am Post subject: |
|
|
Do you get this error message for all .sqb file that are located on this drive? Or you are getting this issue for this particular backup?
Can you also try a virtual restore of a .sqb backup that is hosted on another drive? For eg. c:\
Thanks for your feedback in this matter. |
|
| Back to top |
|
|
|
|
All times are GMT + 1 Hour
|
| Page 1 of 1 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
